Start an inquiry
Signage Lighting
COMMERCIAL & PROFESSIONAL

Signage LED Strip & Neon Flex Lighting

Plan graphic high visibility around the physical detail, operating conditions and maintenance path.

OVERVIEW

Place the light where it supports the task.

Letters, lightboxes, contours and branded surfaces.

KEY QUESTIONS

Resolve glare, access and control.

Form, depth, diffusion, color, wiring, environment and service.

RECOMMENDED PRODUCTS

Build the product direction.

Start with light appearance and physical fit, then confirm the exact configuration.

COMPLETE SYSTEM

Review every connected part.

Treat each connected component as part of one application brief.

01StripChoose light appearance, voltage and dimensions
02ProfileMatch mounting method and internal width
03DiffuserReview glare, transmission and finish
04DriverCalculate load, input and service access
05ControllerDefine dimming or color-control method
06ConnectorMatch width, pins, polarity and current
FAQ

Signage lighting questions.

Use the full planning guide for dimensioned sections, sightline review and mockup decisions.

What information is needed to quote signage LED lighting?

Send dimensioned drawings of the completed sign: front view, return detail, a section through the illuminated area, the mounting surface and the access point. Mark which surfaces emit light, the sign type (face-lit, halo-lit, edge-lit, internally lit or exposed contour), materials and the indoor or outdoor exposure.

Does an IP-rated LED strip make the whole sign waterproof?

No. An IP rating on the light source does not establish that the completed sign has the same protection. Review every boundary separately, including cut ends, connectors, cable entries, seams, drainage, driver enclosures and mounting penetrations.

How is even illumination achieved in channel letters and lightboxes?

Uniformity comes from the complete optical geometry: depth, source spacing and aiming, face transmission, diffuser, internal reflectance and structural shadows. Do not copy a spacing value from another sign; evaluate a representative sample with the intended face material and depth, including the smallest letter or tightest curve.

Can sign makers order LED neon flex or custom LED strips?

Yes. LED neon flex and LED strips are listed in the product catalog. Voltage, color temperature, length and packaging can be customized, and custom production takes 15–20 days once the requirement is confirmed. Bend direction, minimum radius and cut conditions must be verified from the exact model documentation.

Can I order a sample before production?

Samples are bought at the normal product price. Stock samples ship in 2–3 days and ULANTU pays the sample shipping cost.

Full planning steps: Signage LED lighting specification checklist.

START A PROJECT

Bring the product, place and supply question together.

Start an inquiry